Eena Angle Kit Set for Wall Tent Frame
The Eena wall tent angle fitting are made from 1 -3/8" galvanized steel tubing and are used to connect the ridge, eave and leg poles that you'd cut from 1" EMT conduit.
Each fitting is specific to the design of Eena wall tents and their width. The fittings may not work well with other brands or tent designs.
Each set include the end angles fittings for the ridge and eaves, and middle fitting for in between the ends.
To Order:
Determine the width of your Eena Wall Tent.
Decide on the number of rafters needed for support. Here's what we suggest based on the length of your wall tent:
6 ft length: 2 Rafters
9 ft & 12 ft lengths: 3 Rafters
15ft & 18 ft lengths: 4 Rafters
21 ft length: 5 Rafters
See if they are in stock.
Email us to see what we have in stock. We have these made for us locally and may require about 3 weeks to get these to our shop after an order is placed.
The Eena wall tent angle fitting are made from 1 -3/8" galvanized steel tubing and are used to connect the ridge, eave and leg poles that you'd cut from 1" EMT conduit.
Each fitting is specific to the design of Eena wall tents and their width. The fittings may not work well with other brands or tent designs.
Each set include the end angles fittings for the ridge and eaves, and middle fitting for in between the ends.
To Order:
Determine the width of your Eena Wall Tent.
Decide on the number of rafters needed for support. Here's what we suggest based on the length of your wall tent:
6 ft length: 2 Rafters
9 ft & 12 ft lengths: 3 Rafters
15ft & 18 ft lengths: 4 Rafters
21 ft length: 5 Rafters
See if they are in stock.
Email us to see what we have in stock. We have these made for us locally and may require about 3 weeks to get these to our shop after an order is placed.
The Eena wall tent angle fitting are made from 1 -3/8" galvanized steel tubing and are used to connect the ridge, eave and leg poles that you'd cut from 1" EMT conduit.
Each fitting is specific to the design of Eena wall tents and their width. The fittings may not work well with other brands or tent designs.
Each set include the end angles fittings for the ridge and eaves, and middle fitting for in between the ends.
To Order:
Determine the width of your Eena Wall Tent.
Decide on the number of rafters needed for support. Here's what we suggest based on the length of your wall tent:
6 ft length: 2 Rafters
9 ft & 12 ft lengths: 3 Rafters
15ft & 18 ft lengths: 4 Rafters
21 ft length: 5 Rafters
See if they are in stock.
Email us to see what we have in stock. We have these made for us locally and may require about 3 weeks to get these to our shop after an order is placed.
Frequently Asked Questions
Q: Will these fitting work for wall tents that are not made by Beckel?
A: Most likely these will not be a perfect fit. All companies make their tents slightly different and the specific angles of the fittings will be different.
Q: Do you customize these wall tent angle pieces?
A: Sorry, we do not.
